9.2.0 CTRTransfer

Your device may not show your installed games after the CTRTransfer. This is due to the tickets being removed by the transfer, which is why you back them up. They will be restored at the end of the guide.

To use the magnet links on this page, you will need a torrent client like Deluge

Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by the existing NAND, these steps, unlike the 2.1.0 CTRTransfer, will have you backup only the tickets. Failure to back these up will result in the LOSS of all installed games and saves!

What you need

Instructions

Section I - Prep Work
  1. Power off your device
  2. Insert your SD card into your computer
  3. Create a folder named cias on the root of your SD card if it does not already exist
  4. Copy GodMode9.bin from the GodMode9 .zip to the /luma/payloads/ folder on your SD card
  5. Copy the 9.2.0 CTRTransfer image .bin from the CTRTransfer .zip to the /files9/ folder on your SD card
  6. Copy FBI.cia from the FBI .zip to the /cias/ folder on your SD card
  7. Reinsert your SD card into your device
Section II - CTRTransfer
  1. Launch the Luma3DS chainloader menu from arm9loaderhax by holding (Start) during boot
  2. Launch GodMode9 by pressing (A)
  3. Navigate to [0:] SDCARD -> files9
  4. Press (A) on the CTRTransfer .bin to select it
  5. Select “CTRNAND options…”
  6. Select “Transfer image to CTRNAND”
  7. If prompted, select “Transfer to SysNAND”
    • This prompt will only appear if you have an EmuNAND
  8. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
    • This process will take some time
  9. Once the transfer has completed, press (A) to continue
  10. Press (B) twice to return to the main menu
  11. Navigate to [1:] SYSNAND CTRNAND -> dbs
  12. Press (A) on ticket.bak to select it, then select “Ticket.db options…”, then select “Mount image to drive”
  13. If it exists, hold (R) and press (A) at the same time on eshop to select the folder, then select “Copy to 0:/gm9out”
    • This process may take some time if you have many tickets
    • Press (A) to continue once it has completed
  14. If it exists, hold (R) and press (A) at the same time on unknown to select the folder, then select “Copy to 0:/gm9out”
    • This process may take some time if you have many tickets
    • Press (A) to continue once it has completed
  15. Press (Start) to reboot your device
  16. Update your device by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
    • Updates while using A9LH + Luma (what you have) are safe
    • If this gives you an error, set your DNS settings to “auto”
Section III - Injecting FBI
  1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
  2. Launch GodMode9 by pressing (A)
  3. Navigate to [0:] SDCARD -> cias
  4. Press (A) on FBI.cia to select it, then select “CIA image options…”, then select “Mount image to drive”
  5. Press (A) on the .app file, then select “NCCH image options”, then select “Inject to H&S”
  6. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
  7. Press (A) to continue
  8. Press (Start) to reboot your device
  9. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, follow this troubleshooting guide
Section IV - Reinstalling Tickets

If you had no eshop or unknown folders earlier, skip this section.

  1. Launch Health and Safety (which is now FBI)
  2. Navigate to SD -> cias
  3. Select “FBI.cia”
  4. Select the “Install” option, then press (A) to confirm
  5. Return to the SD directory with (B)
  6. Select “gm9out”
  7. Do the following process for either the eshop folder, unknown folder, or both
    • Navigate to the folder
    • Select “<current directory>”
    • Select “Install and delete all tickets”
    • Wait. The system may appear to freeze, just give it time.
    • Press (A) to confirm
    • Press (B) to decline installing tickets from CDN.
  8. Press (Home) to exit FBI
Section V - Restore Health and Safety
  1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
  2. Launch GodMode9 by pressing (A)
  3. Press (Home) to bring up the action menu
  4. Select “More…”
  5. Select “Restore H&S”
  6. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
Section VI - Remove CTRTransfer image
  1. Navigate to [0:] SDCARD -> files9
  2. Press (X) on the CTRTransfer image .bin to delete it
  3. Press (A) to confirm
  4. Press (Start) to reboot your device

Return to Installing arm9loaderhax.

For support in English, ask for help at either #3dshacks on Rizon IRC or Nintendo Homebrew on Discord.
If you appreciate this guide, I accept Donations through both Bitcoin and PayPal.